Coffee capsules are small sealed cups, made of aluminium or plastic, that hold a dose of ground coffee, usually between five and seven grams. A machine pierces the lid, injects hot water under pressure and collects the espresso in the cup. The container protects the grounds from air and light until brewing, which guarantees a constant dose every time. They suit people who want a quick drink without grinding or cleaning a portafilter, and who accept a cost per cup higher than that of packet coffee.
Anatomy of a capsule
A coffee capsule is made of three elements: a bell-shaped or cup-shaped body, a bed of grounds and a lid. The body is most often aluminium, a light metal that is impermeable to oxygen and light and withstands pressure well. In other models it is rigid plastic, sometimes covered with a metallised film. The thin lid is pierced by the machine at the moment the water arrives.
Inside, the grounds are packed into a puck whose density directly affects how long the water takes to pass through. A puck that is too tight gives a slow, bitter coffee, one that is too loose gives a watery drink. Manufacturers therefore carry out very precise tests to obtain a flow of about twenty-five to thirty seconds per espresso.
A protected atmosphere
To limit oxidation, the capsule is filled under a modified atmosphere, that is, by driving out the oxygen before sealing. The coffee can then keep for several months in its individual pack without losing the essence of its aromas, provided the packaging remains intact. A capsule that is dented or accidentally pierced should be discarded.
How it works inside the machine
When you close the lid, the machine grips the capsule and pierces it, generally on top, with blades or points. An electric pump drives water heated to about ninety degrees, with advertised pressures of between fifteen and nineteen bars depending on the model. The base of the capsule is then perforated by the thrust of the water or by small spikes, and the coffee flows into the cup.
This high pressure forms the crema, the fine brown foam that crowns an espresso. It comes from the oils in the coffee and from the carbon dioxide released during roasting. The fresher the coffee, the thicker the crema, which explains why a box stored for a long time sometimes gives a less foamy cup.
- Preheat the machine according to the instructions before the first cup.
- Run one empty rinse cycle with water if the machine has stood unused.
- Use the volume button that suits the drink: short or long espresso.
Compatibility: a point to watch
Capsules are made for a given system. Their diameter, height and rim shape determine which machine can use them. A capsule that is too tall does not close properly, one that is too narrow leaks. The consumer must therefore read the "compatible with" notices before buying.
Since some patents have fallen into the public domain, many independent manufacturers offer compatible capsules at reduced prices. They widen the choice of roasts, origins and organic or fair-trade options. The downside is variable quality: the hardness of the metal, the thickness of the lid and the manufacturing tolerance are not always identical. It is better to test a small box before ordering several.
Intensity, origin, roast
Packs display a numbered intensity scale. It is not standardised, and it combines several criteria: roast level, perceived bitterness and body in the mouth. A high intensity therefore means neither more caffeine nor higher quality. A single origin, for example from Ethiopia or Colombia, offers a more marked aromatic profile, whereas a blend seeks consistency from one year to the next.
Arabicas, more aromatic and lower in caffeine, dominate in premium capsules. Robustas, more bitter and higher in caffeine, reinforce the crema and the strength. The choice is up to the drinker: some want a round, soft coffee, others a tight espresso.
Price and the real budget
The price of a capsule exceeds that of a portion of packet ground coffee, because it includes packaging, conditioning and distribution. To measure the gap, divide the price of the box by the number of capsules. Large boxes and compatible capsules reduce the cost per cup; limited editions raise it.
The machine is another item: entry-level models are cheap to buy but do not always have the volume or temperature settings of a more advanced appliance. Over several years, the cost of the capsules far exceeds that of the machine, and it is this that should guide the comparison.
Health and safety
The aluminium of the capsules is coated on the inside with a food-grade lacquer that limits direct contact between the metal and the drink. Health authorities regulate materials in contact with food, and manufacturers must comply with the applicable European rules. People concerned about this subject can choose plastic or compostable capsules, or switch to a refillable stainless steel pod.
Caffeine remains the main point of vigilance. According to the European Food Safety Authority, a healthy adult can consume up to 400 mg a day, and pregnant women limit their intake to 200 mg. People with high blood pressure, anxiety or sleep problems should ask their doctor for advice.
Recycling and alternatives
A used capsule is made up of a recyclable metal and compostable grounds, but the two are mixed together. In sorting centres, small aluminium objects fall through the screens or get lost in the plastic streams, which is why specialised collection schemes ask for the capsule to be emptied or returned to a collection point. Sorting rules depend on the local authority, which should be consulted before each new use.
Alternatives are increasingly numerous: a capsule in home-compostable bioplastic, a reusable stainless steel capsule to fill with ground coffee, or a return to the filter coffee maker. Each option reduces one type of waste but implies another: the refillable capsule needs water for rinsing, the filter coffee maker needs paper.
Refillable capsule: checkpoints
For a reusable capsule to work well, the grind must suit espresso and be tamped evenly. Tamping too hard blocks the water, tamping too lightly lets the coffee run through too fast. Rinsing straight away stops the grounds drying and clogging the holes.
Maintaining the machine to keep the flavour
A capsule appliance accumulates coffee oil residues and limescale. Empty the used-capsule bin regularly, rinse the tank and wipe the capsule holder. Regular descaling, following the manufacturer's instructions, extends the life of the pump and prevents the temperature from dropping.
A poorly maintained machine can produce a lukewarm coffee, an irregular flow or a taste of metal. When the problem persists after descaling, it is time to contact the after-sales service rather than force the appliance.
Storing your capsules well
Capsules are kept in a dry place, away from heat and strong smells. The refrigerator is not recommended, because condensation when they come out can dampen the packaging. A drawer or a closed cupboard is enough. Use boxes in the order of their best-before date, printed on the packaging, and avoid mixing capsules of different formats in the same container.
