Dosette.com

Single-serve portion of bicycle maintenance product: lube, degrease

A single-serve portion of bicycle maintenance product is a small sachet, a mini bottle or an impregnated wipe that holds a limited quantity of lubricant, degreaser or cleaner intended for the components of a bicycle. It slips into a saddlebag or a bag pocket and is used to work on the road, on a hike or at a destination without carrying a large bottle. It is aimed at daily cyclists, hikers, sportspeople and people who look after their bike occasionally, with no workshop to hand.

The components to look after

A bicycle has several assemblies with different needs. The chain, the sprockets and the chainrings form the transmission, which is highly exposed to mud and dust. The brake and gear cables and their housings need regular glide. Pivots and the bearings of the bottom bracket and the headset are greased in depth. The frame, the saddle and the brakes have their own cleaners.

A small-dose format suits the chain and the cables, which need frequent attention, rather than the bearings, whose upkeep belongs in the workshop.

Chain lubricant: wet or dry

There are two main families. The so-called wet lubricant, more viscous, holds well in rain and mud, but attracts more dust. The so-called dry lubricant, more fluid, dries leaving a light film, suits dusty terrain and stays cleaner, but washes off faster in the rain. The choice depends on the usual weather and the terrain.

For a day's ride, one dose of lubricant suited to the forecast weather is enough. If the chain is very dirty, it is better to clean it first, because oil applied over hardened residues mixes with the mud and forms an abrasive paste.

Degrease before you lubricate

A degreaser dissolves used oil and the black residues stuck to the links. It is applied, scrubbed with a brush or a cloth, rinsed, left to dry and only then lubricated. This rule is the most useful of maintenance: new lubricant on a dirty chain quickly loses its effectiveness.

  • Choose a degreaser compatible with paints and plastics.
  • Protect the brakes and rims when cleaning.
  • Dry the chain completely before oiling.
  • Turn the pedals to spread the product over all the links.

Brakes: a zone not to contaminate

Rim brakes and disc brakes do not tolerate contact with oil. A trace of lubricant on a pad or a disc reduces braking in a dangerous way. When applying to the chain, place a cloth or a piece of cardboard behind the sprockets and avoid spraying near the discs. If contamination occurs, the pad often has to be replaced, and the disc is cleaned with a specific product.

After any work near the brakes, check their effectiveness at low speed before riding in traffic.

Cables, housings and joints

A few drops of a fluid lubricant at the ends of the housings help the cable to glide. Derailleur pivots and brake joints receive a little product, wiped off afterwards. A cable that sticks, a derailleur slow to react or a stiff lever are signs of a need for maintenance. Visible wear, such as a frayed cable, calls for replacement, not lubrication.

Cleaning the frame and components

A damp cloth and a little mild soap are generally enough for the frame. A soft brush clears mud from the sprockets. A direct high-pressure jet on the bearings pushes water into the mechanisms and encourages corrosion. Impregnated wipes are used to remove a smear of grease from the hand or the saddle without dirtying the bag.

Safety precautions

Degreasers and lubricants can irritate the skin and eyes. Handle them outdoors or in a ventilated room, away from flames, and store them out of the reach of children. Soaked cloths are thrown away according to local instructions. An opened sachet in a bag can stain clothes: keep it in a waterproof pouch.

A lubricant does not repair a worn part. A stretched chain, a sprocket with hooked teeth or a damaged cable must be replaced by a professional or by a trained cyclist.

When and how often to intervene

Frequency depends on use. A daily commute in the rain calls for more regular checking than a leisure ride in dry weather. After a ride in the mud, cleaning and a fresh pass of oil are needed. A squeaking transmission, a chain shiny with bare metal or a chain that skips are warnings.

Travel and cycle touring

When travelling by bike, small quantities are carried and renewed along the stages. Doses take little space, do not leak in panniers and are stored with the repair kit, with an inner tube, tyre levers, a pump and a multi-tool. On a plane, liquids follow the volume rules for cabin baggage, and flammable products may be limited by the airline.

Sorting, waste and environment

Packaging soiled with oil does not go into the ordinary recycling bin. It is taken to the recycling centre for maintenance products, or the local authority's instruction is followed. Leftover degreaser is not poured onto the ground or down the sink. Biodegradable products limit pollution in case of a leak. Very greasy cloths are soiled waste.

Cleaning a chain outdoors must avoid letting the product run off towards a watercourse or a storm drain.

Price and alternatives

A dose costs more per millilitre than a large workshop bottle. It brings convenience, avoids waste and stays clean to carry. A regular cyclist does well to buy a bottle with a fine nozzle for the workshop and a small refillable container for the road. An annual visit to a cycle repairer is a useful complement to routine maintenance.

Keeping your doses in good condition

Sachets are stored away from heat and light, in a compartment of the bag, away from any sharp object. A mini bottle is kept capped, upright, in a pouch. The heat of a car boot in summer can soften the packaging, and cold thickens oils. A product whose smell has turned acrid or whose appearance has turned cloudy is discarded.

The steps for the chain, one by one

Place the bike on a workshop stand or lean it against a wall, so that you can turn the crank without falling. Run a clean cloth around the chain to remove most of the dirt. Then apply the lubricant link after link, slowly turning the pedals backwards so as not to touch the rear wheel. One full rotation of the chain is generally enough.

Let the product soak in for a few minutes, then wipe off the excess on the outside of the links, because only the inside, at the level of the rollers and pins, should stay lubricated. A chain that remains very shiny on its outer plates has received too much.

Maintenance according to the type of bike

A city bike with an enclosed transmission or an internal gear hub needs less attention to the chain, but a check of the cables and brakes. A road or gravel bike, with an exposed derailleur, benefits from more frequent cleaning. A mountain bike, exposed to mud, requires cleaning after each hard ride. An electric-assist bike follows the same principles, with extra precautions around the battery and the connectors, which are not soaked in plenty of water.

A bike put away for several months is prepared with cleaning, light lubrication and storage away from humidity, with inflated tyres to spare them.

More to explore