An automatic espresso capsule machine is a pump-driven appliance that handles the piercing of the capsule, the passage of hot water, the volume of the drink and the end of the flow by itself. The user inserts the capsule, presses a button and waits. It uses aluminium or plastic shells containing five to seven grams of ground coffee. It suits people who want the same espresso every day, with no technical skill or settings, a small footprint on the worktop and very little cleaning.
What automation changes
On a manual machine, the user watches the clock and decides when to stop. Here, a flow sensor or an internal timer cuts the water once the programmed volume is reached. The result is identical every cup, which removes the variations caused by inattention. The controls come down to one, two or three buttons, sometimes a touchscreen.
This comfort has a downside: you depend on the factory setting, which sometimes has to be reprogrammed to get the length you want.
Common functions
- Programmable volume for the short espresso and the long coffee.
- Automatic switch-off after a period of inactivity.
- Ejection of the capsule into an internal bin.
- A removable tank with a level indicator.
- Sometimes a steam wand or a built-in milk frother.
Pressure and temperature
The high-pressure pump often reaches fifteen to nineteen bars with nothing in the way, while the pressure at the coffee is about nine bars, as for a classic espresso. The heating, thermoblock or boiler, brings the water to between ninety and ninety-five degrees in a few dozen seconds. This fast heating explains why the machine is ready in under a minute.
Programming your volumes
The procedure is generally the same from one model to another: hold the drink button down until the volume you want is reached, then release. The machine memorises that volume. Simply repeat the operation to change the measure. Programme an espresso at around forty millilitres and a long coffee at about one hundred and ten, then adjust to suit your cups.
Consult the manual for the exact method, because some machines offer a screen menu and others a combination of buttons.
Taste and capsules
Automation does not replace the quality of the capsule. Fresh, well-dosed grounds will give an espresso with a fine crema; a capsule that is too old or badly stored will give a flat drink, however sophisticated the machine. The choice of strength and origin makes the difference between a decent cup and a memorable one.
Systems that read a code adjust the temperature and the time to suit the drink: an extra convenience, at the price of depending on a single type of capsule.
Energy consumption
The peak of consumption comes during heating. A standby mode, then a complete switch-off after a few minutes, limits the losses. Avoid leaving the machine powered all day, because standby still draws a few watts. For two cups a day, the electricity spend stays small compared with the cost of the capsules.
Automatic upkeep
Some models run an automatic rinse at start-up or after every drink. They also signal with a light when descaling is needed. Respect that signal: a scaled-up circuit slows the flow, lowers the temperature and ends up blocking the pump. Descaling follows the manual, with a product made for the purpose, followed by several rinses.
Empty the capsule bin and the drip tray daily, and wash the tank each week in soapy water, well rinsed.
Price of the machine and the capsules
Automatic capsule machines are often bought cheaply, because manufacturers count on sales of capsules to make the system pay. So compare the cost over a two-year period. A machine at fifty pounds that ties you to expensive capsules works out dearer than a machine at one hundred and fifty pounds that accepts economical ones.
Keeping the capsules
Store them in a drawer at room temperature, away from any heat source. Sealed aluminium capsules keep for a long time, while plastic ones call for respecting the best-before date. Set aside any capsule that is swollen or pierced.
End of life of the capsules
After use, the capsule holds damp grounds. Empty them out and throw the shell away as local guidance directs: aluminium capsules often go in the metal packaging bin, while plastic ones depend on the council. Some retailers take back used capsules to recycle them separately.
Ask the council waste service: the rule differs from one authority to another.
Safety
Automation does not remove the risks. Never put your hand near the spout or the housing during the cycle, because the water is very hot and under pressure. Do not take the tank off during brewing, let the machine cool before any dismantling and keep it out of children's reach. Unplug it for any cleaning of the base.
Alternatives
For better value, a forty-four-millimetre pod machine gives a similar result. For freshly ground coffee on demand, a machine with a built-in grinder suits better, with a higher budget. To limit waste, a reusable capsule that you fill yourself can be used in many machines.
Is the espresso the same from one cup to the next?
Yes, as long as the capsule is the same reference and the memorised volume does not change.
Do I have to wait between two capsules?
The time for the pressure to fall is enough, a few seconds depending on the model.
Choosing well
Compare the tank capacity, the height under the spout, the noise level and how easy the capsule bin is to reach. A bin that holds more than ten capsules saves emptying it after every cup. Check that the capsules are available in nearby shops, and whether they can be bought online. A good-quality machine comes with a clear manual and a two-year guarantee.
Lastly, favour a model with an adjustable spout height: it suits an espresso cup as well as a big mug.
Faults you can fix yourself
- The machine will not start: check the socket, that the tank is clicked in and that the lever is fully closed.
- No water comes out: prime the pump by running two empty cycles, tank full.
- The coffee is lukewarm: let the heating complete and pre-warm the cup.
- The capsule is stuck: switch the machine off, wait for the pressure to drop, then reopen gently.
If the problem persists after these checks, contact the seller under the legal guarantee before attempting to take anything apart.
Making better use of the programming
Use different volumes depending on the cup. A small glass of forty millilitres calls for an early stop, whereas a two-hundred-millilitre mug can take a long coffee followed by a top-up of hot water. Do not try to draw a large volume from an espresso capsule: the taste thins out, with bitterness at the end of the cup. If the machine offers a manual rinse function, use it before the first coffee of the morning to renew the water standing in the circuit.
If you go away for several days, empty the tank and unplug the machine. On your return, rinse with fresh water and run two empty cycles before the first drink.
Making the machine last
Regular upkeep is better than a repair: descaling on time, bin emptied, seal wiped, tank washed. Avoid heavily mineralised waters, which clog the circuit faster, and do not leave a capsule in the housing between uses. A machine that is well looked after easily runs for five to ten years.
A last piece of common sense: write down on a note beside the machine the programmed volumes and the date of the last descaling, so that everyone in the household finds the same settings.
