Dosette.com

Coffee pod machine with multiple pod systems: which formats fit?

A woman enjoys a cup of coffee in a sunny kitchen with two compostable capsules on a saucer; topic: coffee pod machine with multiple pod systems

A coffee pod machine with multiple pod systems is an appliance designed to accept several pod formats thanks to interchangeable holders or baskets. Depending on the model, it takes the soft pod of about sixty millimetres, used at low pressure, and the rigid forty-four-millimetre pod of the E.S.E. standard, used with a pump. It suits households where everyone likes a different coffee, long and mild or short and strong, and those who want to keep a free choice of coffee without relying on a single range.

The principle of interchangeable holders

At the heart of the machine the brewing head stays the same, but the holder that receives the pod changes. A flat insert with a wide opening takes the soft pod, while a narrower basket takes the rigid pod. The change is made without tools: you remove one insert, clip in the other and check that the seal is properly in place.

This modularity is useful but calls for care: a holder that is not properly seated makes water leak or sprays steam onto the worktop.

The formats usually supported

  • The soft pod, a round of coffee about sixty millimetres across, enclosed in filter paper.
  • The rigid forty-four-millimetre pod, to the E.S.E. standard, for espresso.
  • Sometimes ground coffee, through a loose-grounds basket.

The list varies from one machine to another: only the manual says precisely which formats the manufacturer guarantees. A format that is not listed should not be tried, because the machine is not designed for it.

One pressure for two uses?

The technical difficulty is to satisfy two kinds of extraction. Espresso needs a pressure of about nine bars at the coffee, whereas a long coffee from a soft pod is content with low pressure. Multi-format machines therefore set their pump according to the holder fitted, or offer two separate circuits.

A model that makes do with a single setting involves compromises: the crema of the espresso is less dense than on a dedicated machine, and the long coffee is a little stronger than expected.

Choosing to suit your habits

A household where one person drinks an espresso after a meal and another a big coffee on waking will find this machine suits them. A person living alone who drinks only one type of coffee will do better to choose a dedicated machine, simpler and often better performing.

Also consider the space taken: the inserts and the storage of the parts need a little room.

Taste and settings

Each format gives a distinct result. The soft pod makes a rounded filter coffee, slightly frothy. The rigid pod gives a more concentrated espresso, with visible crema. To keep the quality up, pre-heat the machine with a cycle of water and rinse the holder after each change of format, so that the powder from one pod does not mix with the other.

Set the volume to suit the cup: an espresso stretched too far loses its body and crema, while a long coffee cut short becomes too strong.

Extra upkeep

More parts means more cleaning. Rinse each insert after use, dry them before putting them away and check that the head seal stays supple. Once a month, soak the removable parts in hot water with a coffee-machine cleaner.

Descaling remains compulsory. Two circuits or a circuit with variable pressure are more sensitive to limescale than a simple machine, so do not go beyond the interval recommended in the manual.

Purchase and running costs

These machines cost a little more than a single-format machine, because of the extra parts. In use, the cost of a cup stays low: paper pods, soft or rigid, are cheaper than capsules. Being able to switch to ground coffee when stock runs out also brings the average price down.

Compare the price per pod across several formats before deciding which assortment to buy.

Compatibility of shop-bought pods

Pods sold as compatible are not all equal: the diameter, the thickness of the paper and the density of the round vary. Try a small box before buying in volume. A pod that is too thick gets jammed, while one that is too thin lets water past the edges.

Also check that the pod states its diameter in millimetres; commercial format names are not enough.

Storage

Pods are kept in their individual wrapping or, failing that, in an airtight tin, somewhere dry and away from heat. Do not mix the two formats in the same tin: confusion at the moment of use is common, especially in a large household.

Sorting used pods

A used pod consists of paper and grounds, both organic. When the paper carries a compostability certificate, the whole round ends up in the home compost or the food-waste collection. Otherwise it goes out with the general waste. The plastic sachets that protect them follow local sorting rules, which the council waste service can explain.

Safety

When changing a holder, switch the machine off and let it cool: the inserts are scalding after use. Never remove the portafilter while under pressure and keep the machine out of children's reach. Make sure the cable does not hang over the edge of the worktop.

Alternatives

Anyone who wants the best result from a single format will prefer a dedicated machine. Anyone who wants a wider choice of flavours and drinks will look at capsule machines, which cost more to run. Anyone who simply wants to vary their coffees can use a refillable-pod machine with ground coffee.

Can the formats be mixed in the same holder?

No, a holder is made for one pod diameter only; never force it.

Which format gives the best crema?

The rigid forty-four-millimetre pod, thanks to the pressure of the pump.

What to check before buying

Look at the official list of accepted formats, whether the inserts come in the box, how easy it is to change holder and whether spare parts are available. A guarantee of at least two years and a clear manual are signs of a serious product. Finally, note the size of the tank and the height under the spout, which limit the choice of cups.

A trial in a shop, when possible, lets you judge the noise and how the holders feel in the hand.

Organising daily life with several drinkers

In a home with several coffee drinkers, set aside separate storage for each format: a drawer or a labelled box is enough. Put the spare inserts beside the machine, in a small tray, so you do not have to hunt for them at each change. A simple rule helps: the insert left in place is the one for the most-drunk coffee, and the other comes out only for the occasional cup.

Mark the date of the last descaling on the tank or the lid with a small label: this avoids forgetting a step that is decisive for the life of the machine.

Recommended first trials

  1. Run a cycle of plain water with each insert to rinse the new parts.
  2. Make a cup with a pod of each format and taste them side by side.
  3. Note the volume obtained and adjust it to your usual cups.
  4. Remember the order of actions: water, insert, pod, closing, extraction.

These first trials also reveal any leak in the seal, which should be reported to the seller within the return period.

Lastly, keep the manual and the original box during the guarantee period: if an insert or the pump breaks down, the after-sales service often asks for proof of purchase and the exact model reference.

More to explore