A coffee pod machine with removable water tank is an appliance whose water reserve detaches from the casing with a simple movement, to be filled under the tap and then put back. This tank, made of transparent food-grade plastic, is fitted with a valve that holds the water in when it is taken off and opens on contact with the base. It interests narrow kitchens, people with no room to manoeuvre a jug in front of the appliance, and everyone who wants to clean the inside of the water reserve easily.
How a removable tank works
The tank slides into a housing at the back, on the side or under the appliance. At its base, a small spring valve stays closed as long as the tank is removed. When the tank clicks onto the base, the valve opens and lets the water run down to the pump. A seal guarantees watertightness. A handle or a notch makes it easier to grip, and a level mark shows the maximum.
Some tanks have a hinged lid so that they can be filled without removing them, others can only be filled once taken out.
Everyday advantages
- Filling under the tap, without carrying a jug of water.
- Complete washing of the inside, with a brush and soapy water.
- Easy replacement of a filter cartridge, where there is one.
- Placing the appliance under a wall cupboard, with access to the tank from the side.
In a small kitchen, this detail often weighs more than the power of the pump, because it makes the daily routine quicker and cleaner.
Capacity and how often to fill
Capacity generally ranges from 0.6 to 1.5 litres. An espresso uses about 40 ml of water, a long coffee about 110 ml. A 1-litre tank therefore gives several dozen espressos, but the water heated in the boiler and used for rinsing also takes a share. For a household of two people, a medium capacity is enough; for an office, a large model or a direct connection is better.
Does it have to be filled completely?
It is not necessary and can even be counterproductive. Standing water goes stale. It is better to fill only what is needed for a few days and to empty the rest before going away.
Water hygiene
A transparent tank lets light through, which encourages algae to grow on the walls if the water stays a long time. Hygiene specialists advise changing the water every day or every other day, and rinsing the tank each time it is filled. Once a week, a full wash in hot soapy water, with a bottle brush, removes the biofilm that forms on the walls. A thorough rinse is then essential to remove every trace of soap.
Watertightness and leaks
The sensitive area is the valve seal. A worn, twisted or dirty seal lets a few drops escape. If you notice a puddle under the appliance, remove the tank and inspect the seal, which is easily replaced if it is available as a spare part. You should also check that the tank is properly seated: if it is put on crooked, the valve cannot open and the water does not flow down, which can trigger the empty-tank light.
Built-in filter cartridge
Several models fit a filtration cartridge inside the tank, which reduces limescale and chlorine. It improves the taste and spaces out descaling, but must be replaced regularly, according to the volume treated or the period given by the manufacturer. A saturated cartridge no longer protects and may even release particles. It is thrown away according to the instructions of the local authority or the brand.
General upkeep
Descaling is still necessary, because a removable tank does not solve the problem of limescale in the boiler. It is carried out with a suitable product, running the solution through the appliance, then rinsing several times with clear water. The tank housing, where dust and drops accumulate, is wiped with a damp cloth. The valve is cleaned gently, without scratching the seal.
Strength and materials
A tank made of thick plastic withstands knocks and repeated washing better. Poor-quality plastics turn yellow and can hold smells. The material must be described as suitable for food contact, which is stated in the leaflet. Avoid the dishwasher at high temperature, which deforms certain tanks, unless the manufacturer says otherwise.
Price and value for money
A removable tank has become standard equipment, including on entry-level models. It does not noticeably raise the price, but its design influences the life of the appliance. A sturdy valve and an accessible seal are worth more than a large volume that is badly designed.
Sorting and waste
A broken or worn tank is taken with small household appliances to a recycling centre or a collection point, because it forms part of an electrical appliance. Used paper pods go in the compost or the household waste depending on the local authority. Filter cartridges are sometimes taken back by the manufacturer.
Precautions
- Unplug the appliance before taking out the tank to clean it.
- Do not force the tank if it resists.
- Avoid filling beyond the maximum mark.
- Wipe up any spilled water near the plug at once.
Alternatives
A fixed tank with an accessible lid is fine if you have a jug with a fine spout. An appliance connected to the water mains, more common in professional settings, removes any filling but requires installation. For small spaces, a portable appliance with a built-in tank can be moved anywhere.
Choosing well
Check the handle, the capacity, the transparency of the material, the presence of a lid and the quality of the seal. The position of the tank matters too: on the side, it stays accessible under a cupboard; at the back, it means moving the appliance. Finally, the availability of spare tanks makes it possible to replace a worn part simply, without changing the whole machine.
Type of water to use
Tap water is suitable in most regions, but its hardness varies greatly from one area to another. Very hard water scales up the boiler quickly; a mineral water rich in minerals does not help. A weakly mineralised water, or water that has passed through a filter cartridge, limits deposits. Pure distilled water should be avoided, as it can upset the level sensors of some appliances.
A hardness test, with strips sold at pharmacies or garden centres, shows the level of limescale and helps to set the descaling frequency.
Noise and position of the tank
A side tank sometimes amplifies the noise of the pump, because the water resonates in the cavity. Models with the tank against the wall are quieter but less practical. The noise level also depends on the worktop: a wooden support or a silicone mat absorbs vibrations. At start-up, a dry sound generally indicates that the tank is almost empty and the pump is drawing in air.
What to do if the pump draws in air?
Fill the tank, push it firmly back into place, then run an empty cycle into a cup. If the water still does not flow down, remove the tank and check the valve, which may be jammed by a limescale deposit.
Use when travelling or in a second home
A removable tank is easily emptied before leaving, which avoids stagnant water and the risk of freezing in an unoccupied home in winter. On return, it is washed, filled with fresh water and two or three empty cycles are run before making the first cup. This simple ritual avoids a coffee that tastes stale.
Storing the tank upside down, with the lid open, during the absence allows it to dry completely and prevents odours from appearing.
Finally, after a long unoccupied stay, it is preferable to renew all the water, including that left in the boiler, before drinking the first cup.